AWS WHB-5.9 
AWS WHB-2.9 
AS/NZS IEC TR 61000.2.7:2009 
USING MULTI-LED SYSTEM TO INCREASE VIVIDNESS OF TEXTILES (PO09, 450-456) 
AS/NZS IEC 60825.4:2016 
AWS WHB-4.9 
ADS AGS1232 
CIE x048-PO59 
BS Z 5:1997 
UOP 99-07 
UOP 999-05 
BS Z 11:1998 
ADS TS97 
PIP VESV1003 
ISA TR84.00.06-2009 
CIE x048-PO45 
AGA Z3801122 
NON-SUBJECTIVE AND SUBJECTIVE EVALUATIONS OF CONCENTRATION OF OFFICE WORKERS IN LIGHTING CONDITIONS WITH DIFFERENT BLUE LIGHTS (PO10, 457-460) 
BS X 38:2005 
JIS Z 9120:1995 
CGA PS-7 
PIP VESV1002 
BS Z 18:2000 
ASAE/ASABE S640 
AWS A5.8/A5.8M:2004 
SAE USCAR18-3 
AS/NZS IEC TR 61000.2.14:2009 
Test Methods for Evaluating Welded Joints 
AWS WIT-W:2008 
AATCC EP8-2017 
AWS Z49.1:2012 
AS/NZS IEC TR 61000.2.8:2009 
ASA S1.22-2021-IEC 60263-2020 
PIP VESV1003 
ASAE/ASABE S647 
ASTM Volume 15.06:2020 
ASA S3.4-2007 (R2020) 
MMPDS MMPDS-13 Chapter 8 
ASAE/ASABE S648-5 
HI 9.6.2 (M119) 
ADS AGS1239 
Symbols for Joining and Inspection 
MMPDS MMPDS-13 Chapter 5 
ASA S1.26-2014 (R2019) 
AATCC M7-1991 
CIE x048-PO53 
MMPDS MMPDS-12 Chapter 3 
NAS NA0135 Rev. 1 
CTA CEB21 
AS/NZS IEC 62509:2020 
BS W 13:1973+A1:2014 
AWS SWJ-WC:08 
BS X 36:1998 
CTA CEDIA-CEB17-A 
ASA S3.7-2016 (R2020) 
HI 9.8-2012 
ASAE/ASABE S638 
ASAE/ASABE S648-5.1 
AS/NZS IEC 62402:2020 
NBBI NB23-2017 Part 4 
AATCC M9-1992 
ADS AGS1219 
ADS AGS1536 
ADS TS83 
ASAE/ASABE S627 
ASAE/ASABE S632-1 
ASAE/ASABE S641 
MMPDS MMPDS-08 Chapter 9 
UOP 991-11 
UOP 981-11 
CTA CEDIA-CEB24-A 
ASA S1.4-2014/Part 3 / IEC 61672-3:2013 (R2019) 
CGA V-9 
BS Z 9:1998 
NBBI NB23-2019 
Monitoring and Control of Welding and Joining Processes 
HI 9.6.9-2013 
CIE x048-PO50 
MMPDS MMPDS-08 Chapter 7 
CTA CEB22 
HI 9.6.3-2012 
AS/NZS IEC 62552.2:2018 
AS/NZS IEC 62320.3:2015 
HI 9.6.3-2017 
ASAE/ASABE S648-4.1 
MMPDS MMPDS-14 Chapter 4 
ASA S3.35-2010 (R2020) 
AGA Z3801186 
Description
AWS D8.2M:2017 expresses the quality characteristics and metrics pertinent to individual resistance spot weldson automotive aluminum structures. The acceptance criteria are the same for all welds regardless of the service load andintended to be applied in conditions typically encountered during manufacturing. Welds at variance from the stated weldquality criteria in this document can still have mechanical properties that satisfy product and design requirements as peragreement between customer and supplier. Any attempted application of this document or the evaluation criteria usedherein to other uses, for example post-crash weld quality assessment, may lead to an erroneous result.
Product Details
- Edition:
- 1st
- Published:
- 03/09/2017
- ISBN(s):
- 9780871719102
- ANSI:
- ANSI Approved
- Number of Pages:
- 40
